T35 Bump Feed Trimmer Head
OEM Replacement String Trimmer Head
Husqvarna T35 — Bump Feed Trimmer Head
Also known as: T-35 Trimmer Head, Auto-Feed Trimmer Head, Husqvarna Universal Bump Head
🚚 Orders Before 2PM Ship Same Day!
GENUINE OEM · SAME-DAY SHIP · EXPERT SUPPORT
Specifications
| Specification |
Details |
| Part Number |
T35 |
| Brand |
Husqvarna |
| Head Type |
Bump Feed (Semi-Automatic) |
| Line Diameter |
0.095 in (2.4 mm) |
| Thread |
M10 x 1.25 LH |
| Color |
Orange / Gray |
| Fitment Type |
OEM Replacement, select Husqvarna models |
The Husqvarna T35 is a semi-automatic bump feed trimmer head designed as a direct OEM replacement for a wide range of Husqvarna gas-powered string trimmers and brushcutters. Also referred to as the T-35 trimmer head or Husqvarna bump head, the T35 advances trimmer line with a simple tap on the ground, minimizing downtime during operation. This head is commonly found on Husqvarna 128LD, 128LDX, 223L, 323L, and other straight and curved shaft trimmer models, making it one of the most widely used replacement heads in the Husqvarna lineup.
Key Features▼
0.095" Line Diameter Capacity
The Husqvarna T35 trimmer head accepts 0.095 inch (2.4 mm) diameter trimmer line, the standard gauge for medium-duty residential and light commercial trimming work. Compatible with round, twisted, and serrated line profiles.
Bump Feed for Lawn Trimming and Edging
The T35 uses a semi-automatic bump feed mechanism — tap the head on the ground while the trimmer is running to advance fresh line. This eliminates manual line adjustments and keeps you trimming with minimal interruption along fences, borders, and edges.
OEM Husqvarna T35 Direct Replacement
This is a genuine OEM Husqvarna T35 replacement head, matching original factory specifications for thread pitch, spool size, and housing dimensions. Cross-referenced against aftermarket heads, the T35 ensures proper torque transfer and line retention without adaptation.
Compatible with Husqvarna Curved and Straight Shaft Trimmers
The T35 trimmer head fits a broad range of Husqvarna gas string trimmer models across both curved shaft and straight shaft configurations, including popular residential and semi-professional units. Always verify the thread specification (M10 x 1.25 LH) before installation.
Compatible Equipment▼
The Husqvarna T35 trimmer head is compatible with a wide range of Husqvarna gas-powered string trimmers and brushcutters. The T35 fits models including the 128LD, 128LDX, 128RJ, 223L, 223R, 323L, 323R, 326L, 326LS, and additional curved and straight shaft trimmer models that use an M10 x 1.25 LH threaded spindle.
- Husqvarna 128LD
- Husqvarna 128LDX
- Husqvarna 128RJ
- Husqvarna 223L
- Husqvarna 223R
- Husqvarna 323L
- Husqvarna 323R
- Husqvarna 326L
- Husqvarna 326LS
- Select additional Husqvarna gas trimmer models with M10 x 1.25 LH spindle thread
Always confirm your trimmer's spindle thread specification before ordering. Refer to your equipment's owner manual or contact our support team to verify fitment.
Common Questions▼
Q: What size trimmer line does the Husqvarna T35 trimmer head use?
A: The Husqvarna T35 bump feed head is designed for 0.095 inch (2.4 mm) diameter trimmer line. Using the correct line diameter ensures proper feed function and prevents the spool from jamming or over-advancing during operation.
Q: Will the T35 trimmer head fit my Husqvarna 128LD or 223L string trimmer?
A: Yes, the Husqvarna T35 is a compatible replacement head for the 128LD, 223L, and many other Husqvarna trimmer models with an M10 x 1.25 left-hand thread spindle. Confirm your spindle thread specification before installing.
Q: How do I load line into the Husqvarna T35 bump feed head?
A: To load trimmer line into the T35, remove the spool from the head housing by pressing the tabs on either side. Wind the line onto the spool following the directional arrow printed on the spool, then feed the line ends through the eyelets on the housing and snap the spool back into place.
Q: Is the Husqvarna T35 a genuine OEM replacement or an aftermarket part?
A: The Husqvarna T35 sold here is a genuine OEM replacement part manufactured to Husqvarna's original factory specifications. It is not an aftermarket imitation, ensuring proper fit, line feed performance, and durability consistent with the original equipment head.
Genuine OEM Quality · Same-Day Shipping · Expert Support
