14" Chainsaw Guide Bar — Part No. 3005 000 4809
STIHL 3005 000 4809 — 14-Inch Chainsaw Guide Bar
Also known as: 14" bar, ST guide bar, chainsaw rail, saw bar, cutting bar
🚚 Orders Before 2PM Ship Same Day!
GENUINE OEM · SAME-DAY SHIP · EXPERT SUPPORT
Specifications
| Attribute |
Detail |
| Part Number |
3005 000 4809 |
| Brand |
STIHL |
| Bar Length |
14 inches (35 cm) |
| Part Type |
Chainsaw Guide Bar |
| OEM / Aftermarket |
Genuine OEM |
| Condition |
New |
The STIHL 3005 000 4809 is a genuine OEM 14-inch chainsaw guide bar designed to fit a range of STIHL chainsaw models. Also referred to as a saw bar, rail bar, or cutting bar, this component guides the cutting chain around the perimeter of the bar during operation and is a direct replacement for worn, bent, or damaged guide bars. It is engineered to STIHL's factory specifications, ensuring proper chain fit, safe operation, and consistent cutting performance for both homeowners and professional users.
Key Features▼
STIHL OEM 14-Inch Bar Specifications
Part number 3005 000 4809 meets STIHL factory tolerances for bar length, gauge, and nose radius. Using a genuine OEM bar ensures correct chain tension and reduces premature wear compared to off-brand alternatives.
14 Inch Chainsaw Bar for Limbing and Pruning
The compact 14-inch cutting length makes this STIHL bar ideal for pruning branches, limbing trees, and light to medium firewood cutting. Its manageable size improves control in tight working conditions.
Genuine STIHL Replacement Bar Cross-Reference
STIHL part 3005 000 4809 is the manufacturer's direct OEM replacement bar. It cross-references to the standard STIHL 14" ST bar used across multiple chainsaw platforms, making it a reliable choice for both repair shops and end users.
Compatible with Multiple STIHL Chainsaw Models
This 14-inch STIHL guide bar is engineered to fit a wide range of STIHL lightweight and mid-range chainsaws. Confirm your model number before ordering to ensure proper bar mount, gauge, and pitch compatibility.
Compatible Equipment▼
STIHL guide bar 3005 000 4809 is a 14-inch OEM replacement bar compatible with select STIHL chainsaw models. The models listed below are commonly paired with this bar, though fitment depends on the specific bar mount, pitch, and gauge of your saw — always verify your model and spec before ordering.
Part number 3005 000 4809 fits STIHL chainsaws including the MS 170, MS 180, MS 181, MS 211, and similar lightweight to mid-class models that accept a 14-inch bar configuration.
- STIHL MS 170
- STIHL MS 180
- STIHL MS 181
- STIHL MS 211
- STIHL MS 193 T
- STIHL MS 201
Common Questions▼
Q: What chainsaw models fit the STIHL 14-inch guide bar 3005 000 4809?
A: Part 3005 000 4809 is commonly used on STIHL MS 170, MS 180, MS 181, and MS 211 chainsaws, among others. Always cross-check your saw's bar mount specifications — including pitch, gauge, and drive link count — to confirm compatibility before installing.
Q: Is STIHL part 3005 000 4809 a genuine OEM guide bar or an aftermarket replacement?
A: Yes, 3005 000 4809 is a genuine STIHL OEM guide bar manufactured to factory specifications. OEM parts ensure proper fitment and longevity compared to generic aftermarket bars that may not match STIHL's gauge or nose sprocket tolerances.
Q: What chain pitch and gauge does the STIHL 3005 000 4809 14-inch bar require?
A: The 3005 000 4809 bar is designed for use with STIHL chains in the 3/8" Picco pitch family, typically in .043" gauge. Refer to your STIHL owner's manual or the bar's stamped markings to confirm exact chain specifications for your model.
Q: How do I know when to replace my STIHL chainsaw guide bar?
A: Replace your STIHL guide bar — including the 14-inch 3005 000 4809 — when you notice uneven wear in the bar rails, a bent or twisted bar, bar groove that is too wide for the chain, or the nose sprocket no longer spins freely. Regular bar rotation and proper lubrication extend bar life significantly.
Genuine OEM Quality · Same-Day Shipping · Expert Support
